Mesh-Node, by Airfy
The network in your home, finally yours.
Mesh-Node puts your home network, your cloud, and your AI under one app that answers to you. Flash open-source firmware onto a router you already own, sign in, done. Free for your first three routers, no card, and the code is on GitHub.
Free for the first three routers. No card. Cancel before you ever add a fourth.
Four steps. About ten minutes.
From a router in a drawer to a network on your phone.
No serial cable. No command line. No spec-sheet treasure hunt. The app does the part that used to require a tutorial and a weekend.
Download the app
Free, on the App Store. Sign in with your Airfy account or start fresh in under 60 seconds.
Scan your network
The app finds every router on your network and tells you which ones can be flashed with Mesh-Node firmware.
Flash, guided
We walk you through it. Most installs finish in under ten minutes. No serial cable, no command line, no broken bricks.
Free cloud, up to three routers
Your nodes phone home to our cloud for updates, telemetry, parental controls. Free for the first three. No card.
The app, three views
The router stays in the closet. The control panel lives in your pocket.
Talk to your network
Ask the AI which device is hogging bandwidth, who is online, which kid is past their screen-time limit. Plain English, real answers.
Every device, on one screen
All your phones, laptops, TVs, printers, smart bulbs. Names you can read. Block or pause in one tap. Schedules per device.
One dashboard for the whole home
Signal map, who is connected where, which node needs reboot. The same view a service-provider tech sees, in your pocket.
Three ways in
The hardware is optional. The software runs on what you already have.
Mesh-Node 3-Pack
For most homes. Up to 250m² covered.
Three pre-paired Mesh-Node units. Plug in, open the app, online in 60 seconds. The same hardware ISPs ship as the reference set.
See the 3-pack
Mesh-Node Single
Add a node to an existing mesh. Or start with one room.
Same firmware, smaller footprint. Join an existing Mesh-Node set with one tap in the app. Stackable, addable, swap-able.
Add a single node
Bring your own router
Tech-comfortable. 1,500+ supported boards.
Got an OpenWrt-compatible router already? Flash Mesh-Node firmware over the air. Same app, same cloud, same support. Zero hardware cost.
Check compatibilityOwn Your Cloud
Own your network. Own your AI. Own your data.
Every new platform wants you in their cloud. We put it in yours. You do not escape one box you cannot leave by signing up for a newer one. We sell the cloud, the support, and the hardware. We do not sell the right to control your network. If Airfy disappears tomorrow, your Mesh-Node firmware keeps running. That is the deal.
Read the firmware on GitHubOwn the code
Mesh-Node firmware sits on top of OpenWrt. Source is on GitHub. Read it, fork it, sign it yourself. No black box on your network.
Own the control plane
Run the cloud on Airfy or run it on your own VM. We support both. Most people start on Airfy cloud, some move to self-hosted later. Your call, never ours.
Own the connection
An encrypted overlay links your nodes, works behind any network, and uses an open standard auditable by anyone. The link between your routers belongs to you, not to a vendor.
For ISPs and service providers
Ship Mesh-Node as your reference home gateway.
Every house you connect becomes a managed site. Your support team gets the same dashboard the subscriber gets. Your brand on the box, our firmware inside, one operator console for fifty thousand customers.
Questions people ask first
Plain answers, no asterisks.
Roughly 1,500 OpenWrt-compatible boards work today. The app tells you yes or no per device, no guessing, no spec-sheet hunting. Cudy M3000 and Mesh-Node-branded hardware ship pre-flashed.
The router in your drawer is already half of a home network.
Add the app, the firmware, and the cloud. Free for your first three. Open source from the moment you plug it in.
Standalone deep-dive at meshnode.com. Firmware on GitHub.